PCMCIA_CAN Card
友情提示:(1)有问题: 可以点击 右边中-在线咨询，左侧qq，旺旺在线联系
         (2)感兴趣: 可以点击 左侧中-分享到

Kvaser DRVcan Fi HS
Not for new designs
Datasheet ( A4 | US-letter)

 

 

Product description

 

EAN Number: 73-30130-00299-9

A Kvaser DRVcan is a combined cable, connector and CAN bus driver for the LAPcan / LAPcan II PCMCIA CAN interface. The DRVcans are interchangeable and designed for maximum flexibility and maintainability.

Property Value
The information herein is subject to change without notice.
Galvanic Isolation No
Bitrate 5-1000 kbit/s
Silent mode Yes
Error frame generation No
Error frame detection Yes
Weight 50 g
On board buffer No
Maximum message rate, send 8000
Maximum message rate, receive 0
Sound No
Clock synchronization N/A
Dimensions (WxLxH) 0x500x0 mm (0.0x19.7x0.0in.)

 

Kvaser LAPcan
Not for new designs
Datasheet ( A4 | US-letter)

 

 

Product description

 

EAN Number: 73-30130-00029-2

The Kvaser LAPcan is a two channel CAN interface for the PC card (PCMCIA) bus with two Philips SJA1000 CAN controllers. The CAN transceivers are built into the interface cables.
The Kvaser LAPcan is a two channel CAN interface for the PC card (PCMCIA) bus with two Philips SJA1000 CAN controllers. The CAN transceivers are built into the interface cables.

 

Major features

  • Quick and easy plug-and-play installation
  • The CAN drivers (DRVcans) are exchangeable; see below
  • Physical layer depends on the DRVcan type
  • Ultrasonically welded card frame
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
  • The on-board firmware will auto-detect the type of DRVcan
  • Driver support for major operating systems
  • PC card (PCMCIA) type II, on-board C161 16-bit microcontroller
  • Large on-board RAM buffer for CAN messages
  • Supports "listen-only" mode for analyzing tools